PPPoE on Digicom Router

Step 1: Firstly, The power supply adapter should be plugged to router’s power port.

 

Step 2: Take Short-length UTP Cable, Plug one of its end to LAN port of router and another to Network card of PC/Laptop.

 

Step 3: Open the browser on PC and type 192.168.10.1 as shown on below fig no:- 1

fig no:- 1

Step 4: Once you get a login prompt, provide username “admin” and password “admin” and Right – Click login buttom as shown on fig no: 2

fig no:- 2

Step 5: Then Right – Click Setup bottom as shown on fig no:- 3

 

fig no:- 3

Step 6: On the Quick setup dialog box, Right – Click Next buttom as shown on fig no:- 4

fig no:- 4

Step 7: On the Quick setup wizard dialog box, Select PPPoE and Right – Click Next buttom as shown on fig no:- 5

fig no:- 5

Step 8: Enter the PPPoE Username and the Password provided by your ISP and Right – Click Next buttom on the dialog box as shown on fig no:- 6

fig no:- 6

 

Step 9: Provide SSID ( Wifi Username), Network Security Key (WPA-PSK) and Right – Click Next buttom as shown on fig no:- 7

fig no:- 7

 

 

Step 10: Lastly, Right-Click the Finish bottom on the dialog box as shown on fig no:- 8

fig no:- 8